Lawn Mower Troubleshooting Tips

Lawn Mower Troubleshooting Tips

If your John Deere lawn mower is not properly cared for it will have a shorter life and experience more problems. Spring is upon us and that means it’s time to begin your yard maintenance. Here’s what to do when you’re ready to tackle yard work but your John Deere equipment isn’t.

Tip #1 – Utilize new fuel and air filters

For starters, fresh fuel and a clean air filter will help prevent lawn mower problems. To clean your air filter, tap it to remove lose debris. If you hold it to the light and see the light, it’s okay to use. If there is no light, replace it with a new air filter.

Use fresh, mid-grade fuel with no higher than E10 Ethanol rating, stored in a clean, sealed container.

Tip #2 – Check bolts, wheels, cables and belts

Tighten all bolts. Check that the lawn mower wheels, cables and belts are not overly worn to avoid problems when you are mowing.

Tip #3 – Check spark plugs and carburetors

Common problems that affect the performance of your John Deere lawn mower are fouled spark plugs, and flooded carburetors.

Replacing the spark plug can make a huge difference in the performance of your mower. Change your spark plug every two years. To avoid a flooded carburetor, you need to drain the carburetor and put new fuel in it.

Tip #4 – Keep a sharp lawn mower blade

A dull blade will not prevent your John Deere lawn mower from starting but it will affect your lawn. Dull blades trim grass unevenly and leave the tips of your grass torn and not cleanly-sliced. If your blade is dull, have it sharpened and balanced for efficient mowing.

Tip #5 – Keep up with routine maintenance

Staying on top of routine maintenance will increase the performance and life span of your John Deere lawn mower and other equipment.

About Green-Parts-Direct

Green-Parts-Direct.com stocks a wide inventory of parts for John Deere power equipment. Our comprehensive parts selection allows us to provide quick response times and help you confidently find the parts you need.

Free Parts Search - Tips to Store Small Engine Equipment for Winter   Shop Now - Tips to Store Small Engine Equipment for Winter

When to Sharpen or Replace Your John Deere Lawn Mower Blade

When to Sharpen or Replace Your John Deere Lawn Mower Blade

To achieve a great cut and a healthy lawn, it is essential to regularly sharpen or replace your John Deere lawn mower blade. While many people only need to sharpen their lawn mower blades once every couple of months, people who mow more than once a week will need to increase maintenance to once each month. The exact timing depends on workload, but if you’re not sure how often to perform blade maintenance, there are a few tell-tale signs that will help you stay on schedule. With the following tricks, you can develop a trained eye and keep your John Deere lawn mower blade up to par all season.

The first and most obvious thing to look for is unevenness in your lawn. When your John Deere lawn mower blade is sharp, your grass should be cut at the same height every time with just one pass of the mower. If you find yourself making multiple passes to compensate for missed patches of grass, a dull blade may be the culprit.

Another way to tell if your John Deere lawn mower blade needs sharpening is by closely inspecting the grass. If you notice that the tip of each grass blade is torn and not cleanly-sliced, it may be time to switch out your blade. Torn tips may also decrease grass health, causing grass to lose its lush, green color to an unhealthy shade of brown.

Lastly—and perhaps most obviously—you can inspect the blade itself. While your John Deere lawn mower blade can usually be salvaged with routine sharpening, it is important to look for large chips or dents in the cutting edge that cannot be smoothed out. Inconsistencies in the blade are likely to tear grass rather than delivering the clean cut that’s important for your lawn. Also pay attention to the thickness of your John Deere lawn mower blade. Over time, sand, dirt, and other yard debris can erode the blade, causing the metal to weaken and become paper-thin. If you notice this, replace the blade immediately to avoid breakage during mowing, which can cause pieces of metal to fly apart and possibly injure you or other bystanders.

Overall, paying close attention to your lawn and your mower will help greatly in determining when to sharpen or your replace your John Deere lawn mower blade. Remember the signs, perform maintenance regularly, and your John Deere lawn mower blade should cut beautifully every time you mow.

About Green-Parts-Direct

Green-Parts-Direct.com stocks a wide inventory of parts for John Deere power equipment. Our comprehensive parts selection allows us to provide quick response times and help you confidently find the parts you need.

Free Parts Search - Tips to Store Small Engine Equipment for Winter   Shop Now - Tips to Store Small Engine Equipment for Winter

When to Sharpen or Replace Your John Deere Lawn Mower Blade

When to Sharpen or Replace Your John Deere Lawn Mower Blade

To achieve a great cut and a healthy lawn, it is essential to regularly sharpen or replace your John Deere lawn mower blade. While many people only need to sharpen their lawn mower blades once every couple of months, people who mow more than once a week will need to increase maintenance to once each month. The exact timing depends on workload, but if you’re not sure how often to perform blade maintenance, there are a few tell-tale signs that will help you stay on schedule. With the following tricks, you can develop a trained eye and keep your John Deere lawn mower blade up to par all season.

The first and most obvious thing to look for is unevenness in your lawn. When your John Deere lawn mower blade is sharp, your grass should be cut at the same height every time with just one pass of the mower. If you find yourself making multiple passes to compensate for missed patches of grass, a dull blade may be the culprit.

Another way to tell if your John Deere lawn mower blade needs sharpening is by closely inspecting the grass. If you notice that the tip of each grass blade is torn and not cleanly-sliced, it may be time to switch out your blade. Torn tips may also decrease grass health, causing grass to lose its lush, green color to an unhealthy shade of brown.

Lastly—and perhaps most obviously—you can inspect the blade itself. While your John Deere lawn mower blade can usually be salvaged with routine sharpening, it is important to look for large chips or dents in the cutting edge that cannot be smoothed out. Inconsistencies in the blade are likely to tear grass rather than delivering the clean cut that’s important for your lawn. Also pay attention to the thickness of your John Deere lawn mower blade. Over time, sand, dirt, and other yard debris can erode the blade, causing the metal to weaken and become paper-thin. If you notice this, replace the blade immediately to avoid breakage during mowing, which can cause pieces of metal to fly apart and possibly injure you or other bystanders.

Overall, paying close attention to your lawn and your mower will help greatly in determining when to sharpen or your replace your John Deere lawn mower blade. Remember the signs, perform maintenance regularly, and your John Deere lawn mower blade should cut beautifully every time you mow.

About Green-Parts-Direct

Green-Parts-Direct.com stocks a wide inventory of parts for John Deere power equipment. Our comprehensive parts selection allows us to provide quick response times and help you confidently find the parts you need.

Free Parts Search - Tips to Store Small Engine Equipment for Winter   Shop Now - Tips to Store Small Engine Equipment for Winter